| |
Volume 48,Issue 6,2019 Table of ContentsDownload Contents
钛合金 | | | A two-layer process and the optimal blank design for the hollow titanium wide-chord fan blade with complex geometries | | | Minghe Chen,Xinchen Wu,Lanshen Xie,Ning Wang and Nan Su | | | 2019,48(6):1717-1724 [Abstract(1137)] [View PDF] | | | | | The Corrosion Behavior and Mechanical Properties of fluorine doped hydroxyapatite/Micro-arc oxidation (MAO) composite coating on the pure titanium substrate using a combination of micro-arc oxidation and electrochemical deposition method | | | Jin Jie,Shuwei Zhou and Dacai Zheng | | | 2019,48(6):1725-1733 [Abstract(974)] [View PDF] | | | | | Microstructure and Mechanical Properties Investigations of Explosively Welded R60702/TA2 Composite Plate | | | Li Shiyun,Li Qingsheng,Chen Zigang and Wen Jinxuan | | | 2019,48(6):1734-1741 [Abstract(1076)] [View PDF] | | | | | Torsional Fretting Wear of Ti6Al4V Alloys in Saline Solutions | | | Lin Xiuzhou | | | 2019,48(6):1742-1748 [Abstract(886)] [View PDF] | | | | | Effect of Silicon on Mechanical Properties of Ti-6Al-2Zr-1Mo-1V Alloy | | | Ju Jiantao,Wang Yue,Hao Fang,Du Yuxuan,Jiang Wei and Sun Feng | | | 2019,48(6):1749-1755 [Abstract(943)] [View PDF] | | | | | Effect of Y doping and vacuum hot-press sintering on the microstructure and mechanical properties of TiAl-based alloys | | | Li Yang,Sun Hongliang,Yang Kang,Deng Peng and Chen Zhiyuan | | | 2019,48(6):1756-1761 [Abstract(1027)] [View PDF] | | | | | An experimental investigation on dry sliding wear behavior of hot-dip aluminized Ti-6Al-4V alloy | | | Wang Shuqi,Chen Wei,Zhang Benguo,Jiang Wei and Cui Xianghong | | | 2019,48(6):1762-1768 [Abstract(907)] [View PDF] | | | | | Melting Numerical Simulation and Experimental Research Based on Wire Induction heating Gas Atomization | | | zhengmingyue,zhangshaoming,huqiang,徐骏,maoweimin,hehuijun,liuyingjie,shengyanwei and zhaowendong | | | 2019,48(6):1819-1828 [Abstract(916)] [View PDF] | | | | | Gradient Pore Structure Design and Mechanical Properties Analysis of Titanium Alloy Implant | | | Shi Zhiliang,Lu Xiaolong,Huang Chen,Li Feng and Sun Yunlong | | | 2019,48(6):1829-1834 [Abstract(1079)] [View PDF] | | | | | Study on the Unsymmetry of Tension and Compression in Titanium Single-crystal Nanopillars Based on Molecular Dynamics Simulation | | | Li Ping,Chu Qian,Yan Siliang,Ji Xiaohu and Xue Kemin | | | 2019,48(6):1835-1840 [Abstract(1047)] [View PDF] | | | | | Study on strengthening and toughening mechanism of Ti-based metallic glass composites | | | Zhao Yanchun,Mao Ruipeng,Xu Congyu,Sun Hao,Jiang Jianlong and Kou Shengzhong | | | 2019,48(6):1841-1846 [Abstract(946)] [View PDF] | | | | | Relationship between interphases formed and gases released during electrolysis of TiO2 | | | humengjun,matongxiang,gaoleizhang,quzhengfeng,wenliangying,huliwen and humeilong | | | 2019,48(6):1847-1851 [Abstract(836)] [View PDF] | | | | | ResearchSon the hot deformation behavior of Ti-5Al-3V-3Zr-0.7Cr titanium alloy as a candidate material for pressure hull of fusion reactor | | | zhaobin,zhaoyongqing,houzhimin,luoyuanyuan,zhangwen,zhangpingxiang and wujinping | | | 2019,48(6):1872-1877 [Abstract(1095)] [View PDF] | | | | | Solid particle erosion of composite coating of gradient carburized layer and TiN(Ti) coating synthesized on TC4 alloy | | | Yanfeng Wang,Zhengxian Li,Jihong Du and Changwei Zhang | | | 2019,48(6):1878-1883 [Abstract(978)] [View PDF] | | | | | Preparation and biological properties of the superhydrophobic coatings on biomedical Ti-6Al-4V alloy | | | Jiang Jiuyang,Liu Hongyu,Xu Jilin,Zhang Peng and Zhang Tiewa | | | 2019,48(6):1884-1891 [Abstract(1099)] [View PDF] | | | | | Microstructure and Mechanical Properties of a New Type Burn Resistant Titanium Alloy with Lower Cost | | | SUN Huanying,ZHAO Jun,Liu Yian,ZHANG Quan,CAO Jingxia and HUANG Xu | | | 2019,48(6):1892-1896 [Abstract(965)] [View PDF] | | | | | Effect of temperature on the interface structure and corrosion ofCu/Ni coating on TC4 alloy | | | Zhu Lixia,Luo Jinheng,Wu Gang,Li Lifeng,Zhang Shuxin,Liu Shuangshuang and Chen Yongnan | | | 2019,48(6):1897-1903 [Abstract(810)] [View PDF] | | | | | Effect of Pre Aging Microstructure on the Mechanical Properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe | | | Du Zhaoxin,Liu Guolong,Cui Xiaoming,Liu Huimin and Cheng Jun | | | 2019,48(6):1904-1908 [Abstract(837)] [View PDF] | | | | | Properties of Al-doped titanium based PbO2 electrodes | | | Tang Changbin | | | 2019,48(6):1909-1915 [Abstract(921)] [View PDF] | | | | | Effect of pulse width on TiNi side interface of laser welded joint of TiNi/ stainless steel | | | Chen Yuhua,Sun Songwei,Zhou Xinwen and Yu Yangyang | | | 2019,48(6):1916-1920 [Abstract(802)] [View PDF] | | | | | The preparation and property of coatings of carrying extract of Rhizoma Drynariae on the surface of pure titanium | | | Peng Shuhao,Li Muqin,Wang Jingyan and Tian Qinwen | | | 2019,48(6):1921-1928 [Abstract(950)] [View PDF] | | | | | Effect of Heat Treatment on Microstructure and Properties of Laser DepositionTC4 / TC11 | | | He Bo,Xing Meng,Sun Changqing and Yang Guang | | | 2019,48(6):1929-1935 [Abstract(931)] [View PDF] | | | | | Studies on the precipitation behavior during solution and aging heat treatment of titanium alloy Ti–15V–3Cr–3Al–3Sn | | | yangliu,wangying,linchongzhi,jiangjian,fangqiang and gengnaitao | | | 2019,48(6):1936-1943 [Abstract(847)] [View PDF] | | | |
材料科学 | | | Thermodynamic analysis and experimental investigation of Mg-9Zn-xAl alloy for semi-solid processing | | | Li Chun,Cui Le and Fan Xinhui | | | 2019,48(6):1769-1776 [Abstract(929)] [View PDF] | | | | | Improvement on mechanical property of B4C/Al composites by addition of Ti through interfacial reaction | | | ruanqing,jiayuzhen,zhengjiyun,liqiulin,liuwei and shuguogang | | | 2019,48(6):1777-1784 [Abstract(1062)] [View PDF] | | | | | Improved oxidation resistance of a CeO<sub>2</sub>-midifed aluminide coating by low-temperature pack cementation | | | Xiaoxiao Tan | | | 2019,48(6):1785-1790 [Abstract(920)] [View PDF] | | | | | A Simple Wet-Chemical Route for the Preparation of Silver Dendrites on Commercial Silicon Wafer and their Application in SERS DetectionS | | | Huang Jian,Ma Dayan and Xu Kewei | | | 2019,48(6):1791-1796 [Abstract(948)] [View PDF] | | | | | Influence of Pulse Period of Bidirectional Pulse Electrodeposition Process on the Properties of Electroformed Layer of Gold | | | Zheng Lishan,Yuan Xinqiang and Lei Ting | | | 2019,48(6):1797-1802 [Abstract(920)] [View PDF] | | | | | Interdiffusion and Atomic Mobilities in Ni-rich fcc Ni-Nb-Ti Alloys | | | wangcuiping,linyuanjing,luyong,魏振帮,zhangyanqing,hanjiajia and liuxingjun | | | 2019,48(6):1803-1808 [Abstract(990)] [View PDF] | | | | | Characterization of thermal stability of RuMoC films as seedless Cu diffusion barriers in damascene structures for Cu interconnects | | | Zou Jian Xiong,Lin Li Wei,Jiao Guo Hua,Lu Yuan Fu,Liu Bo and Xu Ke Wei | | | 2019,48(6):1809-1813 [Abstract(936)] [View PDF] | | | | | Effects of cooling rate on the microstructures and transport properties of AgAu sheathed Bi-2223 tapes | | | Ma Xiaobo,Zhang Shengnan,Yu Zeming,Liu Guoqing,Jiao Lei,Zheng Huiling,Li Chengshan,Zhang Pingxiang and Li Jinshan | | | 2019,48(6):1814-1818 [Abstract(1099)] [View PDF] | | | | | Research on Constant-strain-rate Extrusion of AZ31 Magnesium alloy plate | | | CHENG Xiaole,QI Zhixu,Qu Yinhu,SHI Jingjing and YIN Jun | | | 2019,48(6):1852-1859 [Abstract(816)] [View PDF] | | | | | Effects of trace Zr on the solid solution texture and properties of Al-0.8Mg-0.9Si alloy sheets by asymmetrical rolling | | | Du Hong,Yuan Gecheng,Ding Canpei,Lin Dianhai,Yang Anchen and Wu Qiguang | | | 2019,48(6):1860-1866 [Abstract(870)] [View PDF] | | | | | Theoretical and experimental study on preparing WC coating vialow-temperature detonation spraying | | | Han Zhiwei,Guo Wanxiao,Li Yaning and Wang Boliang | | | 2019,48(6):1867-1871 [Abstract(807)] [View PDF] | | | |
材料工艺 | | | Influencing Factors on Differential Scanning Calorimetry (DSC) Analysis of Superalloy III: Alloy state and Heating/Cooling Rate | | | Zheng Liang,Liu Yufeng,Liu Yang,Wang Yue,Zhang Yibo,Liu Na,Xu Wenyong,Yuan Hua,Li Zhou and Zhang Guoqing | | | 2019,48(6):1944-1953 [Abstract(1369)] [View PDF] | | | | | Effect of ultrasonic peening on tensile-tensile fatigue properties of industrial pure zirconium | | | zhangconghui,yangjun,songguodong and renhaitao | | | 2019,48(6):1954-1960 [Abstract(932)] [View PDF] | | | | | Reach of the preparation, Microstructure and Properties of Gr / 6061Al Composites sintered by Hot Pressing Sintering | | | Lu Ningning,Xu Lei,Li Changyun,Wang Youchao,Mi Guofa and Yang Erkuo | | | 2019,48(6):1961-1968 [Abstract(1000)] [View PDF] | | | | | Influence of different treatment processes on microstructure and properties of Cu-Ni-Co-Si alloy | | | Peng Lijun,Ma Jimiao,Liu Xingyu,Liu Feng,Huang Guojie,Hong Songbai,Xie Haofeng and Liu Dongmei | | | 2019,48(6):1969-1974 [Abstract(942)] [View PDF] | | | | | Microstructure characterization of Electrodeposition of Micro/nanocrystalline nickel plate and Cold rolling deformation microstructure evolution research | | | Xia tiandong,Guo Longbang,Zhang Han and Qiao Jiseng | | | 2019,48(6):1975-1981 [Abstract(772)] [View PDF] | | | | | Effect of the extrusion temperature on the microstructure and corrosion resistance of solution-treated Mg-2.0Zn-0.5Zr-3.0Gd alloy | | | Yao Huai,Wen Jiuba,Xiong Yi,He Junguang and Liu Ya | | | 2019,48(6):1982-1989 [Abstract(858)] [View PDF] | | | | | Investigation on Thermal Model and Peak Temperature in High-travel Velocity Friction Stir Welding of Aluminum Alloy | | | Wan Xinyong,Hu Zhili,Pang Qiu and Zhan Boyi | | | 2019,48(6):1990-1995 [Abstract(893)] [View PDF] | | | | | Influence of Ca and Al on LPSO phase in Mg-Gd-Zn alloys and Their Mechanical Property | | | Zeng hang-hang,Bian Li-ping,Zhao Yuan-liang,Yang Fan,wang Qian,Liang Wei and Zhao Xong-guo | | | 2019,48(6):1996-2001 [Abstract(941)] [View PDF] | | | | | Corrosion Resistance of Electro-brush Plating Ni-graphene Composite Coatings | | | JIN Guo,dingxiaolong,HU Zhenfeng,LV Biao and WANG Xiaohe | | | 2019,48(6):2002-2008 [Abstract(973)] [View PDF] | | | | | Influence of Oxygen content on Dy grain boundary diffusion in Nd-Fe-B sintered magnets | | | Cheng Xinghua,Li Jian,Zhou Lei,Liu Tao,Yu Xiaojun and Li Bo | | | 2019,48(6):2009-2013 [Abstract(994)] [View PDF] | | | | | Studies on the microstructure and properties of the as-cast and annealed Al0.8CoCrFeNiTi0.2 high-entropy alloys | | | JIANG Shu-ying,LIN Zhi-feng,XU Hong-ming and ZHANG Da-lei | | | 2019,48(6):2014-2020 [Abstract(849)] [View PDF] | | | | | Preparation of MoNbTaW Refractory High-Entropy Alloys by Spark Plasma Sintering | | | Han Jiesheng,Wu Youzhi,Meng Junhu,Zhang Aiju and Su Bo | | | 2019,48(6):2020-2026 [Abstract(979)] [View PDF] | | | | | Influence of La Promoter in Pd/AL2O3 Catalyst on C3H8 Oxidation | | | chenchao,wangchengxiong,yaolipeng,zhengtingting and zhaoyunkun | | | 2019,48(6):2027-2032 [Abstract(943)] [View PDF] | | | | | Mechanical properties of pure molybdenum during high-pressure torsion processing at micro/nano scale | | | Xue Kemin,Wang Zhe,Liu Mei,Wang Xue and Li Ping | | | 2019,48(6):2033-2037 [Abstract(816)] [View PDF] | | | | | Effect of Electrolytic Process Parameters on the Purity andParticle Size of Indium Powder (II) | | | Xiao-min Wang,Hai-lian Cao,Hui Nan,Zhi-xin Wang,Xue-wei La and Ting-an Zhang | | | 2019,48(6):2038-2043 [Abstract(763)] [View PDF] | | | | | Effect of Zirconium Salts on Preparation of Zirconia Nanopowders via Polyacrylamide Gel Route | | | Liu Ting,Chen Weidong,Ju Hongmin,Yan Shufang and Ma Wen | | | 2019,48(6):2044-2048 [Abstract(784)] [View PDF] | | | |
|
