| |
Volume 46,Issue 10,2017 Table of Contents
材料科学 | | | Dynamic behavior and constitutive model for two tantalum-tungsten alloys under elevated strain rates | | | Gao Fei,Zhang Xianfeng,Serjouei Ahmad,Wang Mingyang,Li Lei,Xiong Wei and Zhang Jiang | | | 2017,46(10):2753-2762 [Abstract(1879)] [View PDF 594.69 K (2206)] | | | | | Prediction for Magnesium Alloy Rolling Force Based on Quantitative study of Contact-friction | | | Jia Weitao,Le Qichi and Tang Yan | | | 2017,46(10):2763-2769 [Abstract(1558)] [View PDF 632.57 K (2175)] | | | | | Deformation Feature of TC4 Rod Based on Multi-line Triangle Pass System | | | SHUAI Meirong,LIU Hao,LI Haibin,HUANG Zhiquan and HUANG Qing-xue | | | 2017,46(10):2770-2774 [Abstract(1801)] [View PDF 511.94 K (1501)] | | | | | Effects of different thermoplastic wax-based binders on properties of 316L stainless steel injection molding parts | | | Dou Ya-kun,Feng Yi,Huang Xiao-chen,Tang Hai,Ding Dong-dong,Tian Pei,Xia Meng,Qian Gang and Zhang Xue-bin | | | 2017,46(10):2775-2780 [Abstract(1469)] [View PDF] | | | | | Study on Thermal Properties of Plasma-Sprayed (La0.4Sm0.5Yb0.1)2Zr2O7 Coatings | | | Ling Liu,Fuchi Wang,Zhuang Ma and Yingchao Sun | | | 2017,46(10):2785-2789 [Abstract(1375)] [View PDF] | | | | | Illustration of internal friction peaks observed in Mg-0.6%Zr and Mg-Ni high damping magnesium alloys | | | Wan Diqing and Wan Jincheng | | | 2017,46(10):2790-2793 [Abstract(1429)] [View PDF] | | | | | Study on the Interfacial Fracture Toughness of Fiber Reinforced Titanium Matrix Composites by Push out Test | | | Sun Qing,Yang Yan Qing,Luo Xian,Zhang Rong Jun,Huang Bin and Xue Chun Ling | | | 2017,46(10):2794-2800 [Abstract(1510)] [View PDF] | | | | | Study on the Effect of TiO2 Sol on the Microstructure and Tribological Properties of Cu-Sn Coating | | | Ying Lixia,Li Zhenghui,Wu Ke,Lv Xiupeng and Wang Guixiang | | | 2017,46(10):2801-2806 [Abstract(1842)] [View PDF] | | | | | Effect of Si on Hot Corrosion Resistance of CoCrAlY Coating | | | zhang shu ting | | | 2017,46(10):2807-2811 [Abstract(1674)] [View PDF] | | | | | Review on brazing of high volume faction SiCp/Al composites for electronic packaging applications | | | Zhang Xiangzhao,Zhao Santuan,Liu Guiwu,Xu Ziwei,Shao Haicheng and Qiao Guanjun | | | 2017,46(10):2812-2819 [Abstract(1692)] [View PDF] | | | | | EffectSofSNiScontentSonStheSmicrostructureSand propertiesSofSWC–Ni composites prepared by electroless plating and powder metallurgy | | | Hongyu Chen,Zhaocheng Wang,Laima Luo,Liu Zhu,Zhibiao Tu and Yucheng Wu | | | 2017,46(10):2820-2824 [Abstract(1345)] [View PDF] | | | | | Mechanical behavior and microstructure evolution of Al-Cu-Li alloy during multi-pass hot deformation | | | Yang Shengli,Shen Jian,Li Xiwu,Yan Xiaodong,Zhang Yongan,Li Zhihui,Huang Shuhui and Xiong Baiqing | | | 2017,46(10):2825-2830 [Abstract(1425)] [View PDF] | | | | | Preparation of Alumina Coatings as TritiumPermeation Barrier by a composite Treatment of low temperature plasma | | | fengjun,chenmeiyan,tonghonghui,jinfanya,danmin,xuzejin,shenliru and zhangguikai | | | 2017,46(10):2837-2841 [Abstract(1363)] [View PDF] | | | | | The numerical simulation of non-equal sintering metal powders by surface diffusion | | | Song Min,Zheng Zhoushun,Chen Dongdong,Tang Huiping and Wang Jianzhong | | | 2017,46(10):2842-2846 [Abstract(1322)] [View PDF] | | | | | Effect of hot extrusion on the microstructure and mechanical properties of the SiCp/Mg-9Al-1Zn nanocomposite fabricated by different stir time | | | Wang Wanhua,Wang Hongxia,Ren Guangxiao,Cheng Weili and Zhang Shaoxiong | | | 2017,46(10):2847-2851 [Abstract(1356)] [View PDF] | | | | | The evolution of primary α phase morphology and mechanical properties of a new high-strength titanium alloy during heat treatment | | | Zhou Wei | | | 2017,46(10):2852-2856 [Abstract(1209)] [View PDF] | | | | | Microstructure and Mechanical Properties of TiN/CrN Multilayer Films | | | Qiaoling Jin,Haidou Wang,Guolu Li,Jianjun Zhang and Jinna Liu | | | 2017,46(10):2857-2862 [Abstract(1433)] [View PDF] | | | | | Theoretical research on the effect of Cr, Mo on the mechanical properties and electronic structure of DO3-Fe3Al | | | Chen Yu,Yao Zheng-jun,Zhang Ping-ze,Luo Xi-Xi and Han Peide | | | 2017,46(10):2863-2869 [Abstract(1402)] [View PDF] | | | | | Study in binary phase of Al-15wt.%Mg2Si composite | | | Liu Tongyu,Li Yingmin and Ren Yuyan | | | 2017,46(10):2870-2876 [Abstract(1207)] [View PDF] | | | | | Isothermal Section of Zr-Fe-Cu Ternary System at 700℃ | | | Zhang Min,Luo Wenbin,Ding Jiating,Cheng Hongmei,Ouyang Yifang,Yuan Gaihuan,Zhu Jinming and Liang Jianlie | | | 2017,46(10):2877-2882 [Abstract(1343)] [View PDF] | | | | | A Novel Method for Evaluating the Toughness of Porous Ceramics - Uniaxial Compression Testing | | | Chen Meng,Jin Haiyun,Pan Xide,Wang Hongjie and Jin Zhihao | | | 2017,46(10):2883-2888 [Abstract(1511)] [View PDF] | | | | | Crystallographic calculation about heterogeneous nucleation potency of RE2O3 in liquid steel | | | Ji Yunping,Kang lei,Song Yanqing,Qu Wei and Ren Huiping | | | 2017,46(10):2889-2894 [Abstract(1646)] [View PDF] | | | | | The microstructure evolution and the loss of Burgers orientation relationship during dynamic globularization for TC17 titanium alloy | | | Zhiqiang Jia,Weidong Zeng and Kaixuan Wang | | | 2017,46(10):2895-2899 [Abstract(1532)] [View PDF] | | | |
材料工艺 | | | Semi-solid Billet Prepared by Radial Forging Combined with Unidirectional Compression Recrystallization and Partial Melting | | | Wang Yongfei,Zhao Shengdun,Fan Shuqin and Zhao Yongqiang | | | 2017,46(10):2900-2907 [Abstract(1318)] [View PDF] | | | | | Microstructure evolution of ZK60 magnesium alloy during hydrogenation -dehydrogenation processing and preparation nanocrystalline magnesium alloy | | | Xu Lian lin,Fan Jian feng,Zhang Hua,Xia Zong kun,Dong Hong biao and Xu Bing she | | | 2017,46(10):2908-2914 [Abstract(1600)] [View PDF 438.31 K (1691)] | | | | | Temperature Sensitivity of Fatigue Crack Growth Rate for GH4720Li Alloy | | | Nai Qiliang,Dong Jianxin,Zhang Maicang,Zheng Lei,Yao Zhihao and Qu Jinglong | | | 2017,46(10):2915-2921 [Abstract(1719)] [View PDF 731.09 K (2115)] | | | | | Microstructure evolution during hot and cold working process and microstructure characteristics of GH5188 superalloy | | | Gao Yawei,Dong Jianxin,Yao Zhihao,Zhang Maicang and Niu Yongji | | | 2017,46(10):2922-2928 [Abstract(1501)] [View PDF] | | | | | Heredity of γ′ phase during the dissolution process to the precipitating process in GH720Li | | | CHEN Jia-yu,YU Qiu-yin,DONG Jian-xin,ZHANG Mai-cang and YAO Zhi-hao | | | 2017,46(10):2929-2935 [Abstract(1844)] [View PDF] | | | | | Research on Hot Compression Deformation Behavior of as-cast ZK60-1.0 Er magnesium alloy | | | fuxuedan,wangzhongjun and jiaweiping | | | 2017,46(10):2936-2942 [Abstract(1373)] [View PDF 816.02 K (1345)] | | | | | Effect of porous structure barrier layer on microstructure and properties of CuW/Al interface | | | Jin Yanting and Liang Shuhua | | | 2017,46(10):2943-2949 [Abstract(1827)] [View PDF 846.82 K (1941)] | | | | | Mechanical properties and solution treatment and aging behavior of nano-B4CP/2009Al composite | | | LIU Yue and QU Guang | | | 2017,46(10):2950-2956 [Abstract(1454)] [View PDF] | | | | | Research on oblique bending control of four roll bending for section of 2099-T83 Al-Li alloy | | | HU Zhi-hua,CHEN Ming-he and XIE Lan-sheng | | | 2017,46(10):2957-2962 [Abstract(1603)] [View PDF 611.34 K (2012)] | | | | | Effect of Sodium dodecyl sulfate on IrO2 - Ta2O5 / SnO2 - Sb - Mn/Ti electrode electric catalytic performance | | | lizhenan,zhaoyu,lipeng,yangshengxiang and wanglizhang | | | 2017,46(10):2963-2968 [Abstract(1520)] [View PDF] | | | | | The Study on High Temperature Electrochemcial Behaviors of Alloy 690 | | | LU Hui,WANG Jia-mei,ZHANG Le-fu,MENG Fan-jiang and SHI Xiu-qiang | | | 2017,46(10):2969-2974 [Abstract(1466)] [View PDF] | | | | | Influence of Deformation Refinement Grain and Lubrication Rolling on theCube Texture Formation in Ni-9.3at.%W Alloy Substrate | | | Peng Faxue,Ma Lin,Tian Hui,Suo Hongli,Meng Yichen,Liang Yaru,Liu Jing and Zhong Zhipeng | | | 2017,46(10):2975-2980 [Abstract(1387)] [View PDF] | | | | | The research of solution-cold deformation-aging to ultra-high strength aluminum alloy Al - 13.01Zn - 3.16Mg - 2.8Cu - 0.204Zr - 0.0757Sr affected tissue and properties | | | xuxiaojing,zhujinxin and guoyunfei | | | 2017,46(10):2981-2986 [Abstract(1306)] [View PDF] | | | | | Structure Design of Ti-6Al-4V Artificial Bone Scaffold based on SLM | | | Yang Wenjing,Wurikaixi AIYITI,Wang Juan and Teng Yong | | | 2017,46(10):2993-2998 [Abstract(1795)] [View PDF] | | | | | Influences on Microstructure of DZ98M Composition of the Alloy by Rapid Solidification | | | ZHAO Chenglei,LIU Jide,LI Jinguo,PEI Wenli and ZHAO Xiang | | | 2017,46(10):2999-3004 [Abstract(1860)] [View PDF] | | | | | Microstructure Evolution and Tensile Properties of β-γ TiAl Alloy Containing High Content of Nb | | | Yang liang,Xin Jingjing,Zhang Youwei,Bao Chunling,Zhang Laiqi and Lin Junpin | | | 2017,46(10):3005-3010 [Abstract(1747)] [View PDF 488.60 K (2069)] | | | | | Creep limit load analyses for titanium pressure vessels at ambient temperature | | | Li Jian,Zhou Changyu,Peng Jian,Chang Le and He Xiaohua | | | 2017,46(10):3011-3016 [Abstract(1885)] [View PDF 486.35 K (1956)] | | | | | Effects of Extrusion on Microstructure and Friction Wear Resistance in situ ZrB2/6063Al Matrix Composites | | | lihui | | | 2017,46(10):3017-3022 [Abstract(1304)] [View PDF] | | | | | Investigation Of Oxidation Parameters Of Ag-Sn-In Alloy Powders | | | Gao Pan and Liu Xinyu | | | 2017,46(10):3023-3027 [Abstract(1547)] [View PDF 672.69 K (1702)] | | | | | Dendrite morphology and microstructure in directionalloy solidified Mg alloy with rare earth element Y | | | Yang Chubin,Luo Ning,Zhang Xiaolian and Han Baojun | | | 2017,46(10):3028-3032 [Abstract(1681)] [View PDF 658.42 K (1655)] | | | | | Effect of Thermomechanical Treatment on Microstructure and Mechanical Property of Solution-aged Al-10.78Zn-2.78Mg-2.59Cu-0.22Zr-0.047Sr Aluminum Alloy | | | zhangjingyu and xuxiaojing | | | 2017,46(10):3033-3037 [Abstract(1561)] [View PDF 593.98 K (2193)] | | | | | Microstructures and Properties of Sn-Bi-In Low-temperature Lead-free Solders | | | Li Qin,Lei Yongping,Fu Hanguang and Lin Jian | | | 2017,46(10):3038-3042 [Abstract(1480)] [View PDF] | | | | | Effect Study of Composition and Sintering Temperature on Reaction Heat of Fe-Al Reactive Material | | | WANG Xiaoyi,WANG Yangwei,WANG Zaicheng,JIANG Chunlan and LI Qiang | | | 2017,46(10):3043-3047 [Abstract(1392)] [View PDF] | | | | | Non-isothermal Crystallization Kinetics of W17.9Ni65.6B13.5V3 Amorphous Alloy | | | Liu Wensheng,Wu Yayu,Ma Yunzhu,Zhang Jiajia and Ye Xiaoshan | | | 2017,46(10):3048-3052 [Abstract(1385)] [View PDF] | | | | | Self-healing Effect on the Corrosion Resistance of the Pd-based Amorphous Alloys | | | LiuWei,Liu Li,Song He,Xiong Shan,Du Wei and Zhao Xiangjin | | | 2017,46(10):3053-3057 [Abstract(1204)] [View PDF] | | | | | Study on electroforming Ni from ionic liquid | | | qian jiangang,yinying,li xin,hu xiao tian,li jing and li tie jun | | | 2017,46(10):3058-3062 [Abstract(1084)] [View PDF] | | | | | Effect of Stirring Magnetic Filed on the Macrostructure and Composition of Ti-1023 Alloy Ingot | | | He Yongsheng,HuRui,Luo wenzhong,Sun feng,Wang Kaixuan,Li jinshan and Liu xianghong | | | 2017,46(10):3063-3067 [Abstract(1594)] [View PDF 1.01 M (1889)] | | | | | Fatigue fracture mechanism of Ti-6Al-4V strengthened by wet peening treatment | | | LI Kang,FU Xue-song,LI Zhi-qiang and ZHOU Wen-long | | | 2017,46(10):3068-3072 [Abstract(1698)] [View PDF 448.37 K (1830)] | | | | | Research on the Distribution of Texture along the Tube Wall Thickness of TA18 Alloy Tube | | | Sheng Zemin and zhanghui | | | 2017,46(10):3073-3076 [Abstract(1723)] [View PDF] | | | | | Study on Phosphate Densification Technology and Properties of Rare Earth Conversion Films on Magnesium Alloy | | | Jin Yaxu,Dong Bijian,Fang Daqing and Zhang Bowen | | | 2017,46(10):3077-3080 [Abstract(1613)] [View PDF 508.27 K (1718)] | | | | | Investigation on Damage Behavior of TiB2-based Ceramic Composites under Hypervelocity Impact | | | Xuegang Huang,Jie Huang,Xuezhong Wen,Jing Li,Lin Jiang,Jun Zhang,Yingli Xing and Sen Liu | | | 2017,46(10):3081-3090 [Abstract(1615)] [View PDF] | | | | | MICROSTRUCTURE EVOLUTION AND COMPOSITION VARIATION IN MUSHY ZONE OF CO-87.9wt%SB ALLOY UNDER TGZM EFFECT | | | wanghongqiang and li shuang ming | | | 2017,46(10):3091-3097 [Abstract(1198)] [View PDF] | | | | | The Research on Microstructure and Corrosion Resistance of Applied Electricity with Self-sealing and Micro-arc Oxidation Coatings of AZ91D Magnesium Alloys | | | Chen Hong,Huang Jie,Chen Yongnan,Hao Jianmin and Ding Yeli | | | 2017,46(10):3098-3104 [Abstract(1238)] [View PDF] | | | | | Investigation on incipient melting and solution heat treatement of a boron-bearing third generation single crystal nickel base superalloy | | | zhang yan bin and liu lin | | | 2017,46(10):3105-3110 [Abstract(1276)] [View PDF] | | | | | Effects of heat treatment on microstructures and properties of HA/Mg-Zn-Ca biocomposite | | | Jiang Yaling,Liu Debao,Yang Min and Zhao Yue | | | 2017,46(10):3111-3116 [Abstract(1237)] [View PDF] | | | | | Tritium aging effects on thermodynamics of sponge palladium absorbing/desorbing protium and deuterium | | | Liu Meng,Zhu Hongzhi,Su Yongjun,Yang Jinshui,Ding JingJing and Jiang Yidong | | | 2017,46(10):3117-3122 [Abstract(1229)] [View PDF] | | | | | Study on the preparation of spherical molybdenum powder by spray drying and microwave calcination | | | Zhao Panchao,Yi Wei and Chen Jialin | | | 2017,46(10):3123-3128 [Abstract(1119)] [View PDF] | | | | | Effect of SiC on the Corrosion and Wear Resistance of the Ni-W Alloys | | | Li Baosong,Zhang Wen,Huan Yuxing and Zhang Weiwei | | | 2017,46(10):3129-3134 [Abstract(1151)] [View PDF] | | | | | Synthesis of Porous TiN Fiber via Reduction-nitridationReaction Based on Electrospinning and Its Electrochemical Performance | | | Lv Dongfeng,Bu Jinglong,Wei Hengyong,Cui Yi,Ni Jie,Liu Pan,Liu Huixing,Wei Yingna and Zhang Lifang | | | 2017,46(10):3135-3140 [Abstract(1308)] [View PDF] | | | | | Study on Powder Metallurgical Foaming Mechanism of Aluminum Foam Sandwich Using SR-CT | | | Zu Guoyin,Sun Xi,Huang Peng and Sun Shiliang | | | 2017,46(10):3141-3145 [Abstract(1272)] [View PDF] | | | | | Microstructure and Property of Sub-rapid Solidified Magnesium Alloy Containing SiC Particle | | | Yang Wei,Yin Haimi,Nie Haiming and Yu Huan | | | 2017,46(10):3146-3150 [Abstract(1103)] [View PDF] | | | | | Effect of Electrolytic Process Parameters on the Purity andParticle Size of Indium Powder (I) | | | Xiao-min Wang,Zhi-xin Wang,Xue-wei La and Ting-an Zhang | | | 2017,46(10):3151-3155 [Abstract(1170)] [View PDF] | | | | | Titanium clad steel plate and micro structure by transient liquid phase diffusion bonding | | | YU Xiao-hua,DONG Xiang,LI Ru-yan,ZHANG Kao-min,ZHAO Yan,GE Jie and LIU Shuhe | | | 2017,46(10):3156-3159 [Abstract(1570)] [View PDF] | | | |
评述 材料科学 材料工艺
|
